Plate Shot Blasting Machine

Tunnel Type Steel Plate Shot Blasting Machine is designed as complete surface preparation for steel plates, beams, profiles, flat bars, and tubes. The plate ranging from2 meter to5 meter wide. This is a continuous process with material loading, take raw steel and place it on the input conveyor and then take blasted, cleaned, automatic painted, dry plate and take off at the other end. A complete system include: Roller conveyors, Blasting chamber, Abrasives recovery system, Abrasives separator & Storage hopper, Abrasives cleaning system, Dust collector, Automatic Spray paint booth and Drying oven. The blasting part adopts centrifugal high-efficient blast wheel, mechanical and continuous abrasive handling and reclamation. The cleaning part adopts high quality rotary brush and high pressure blower blow off. Automatic spray painting system adopts high pressure airless spray methods. The preheating and drying part adopt various heating methods, such as electric and gas etc. The complete automatic system is controlled by PLC with full interlock safety system provided. SPECIFICATIONS QXY2000 QXY3000 QXY4000 QXY4500 Entrance Dimension 2100x400mm 3100x600mm 4100x600mm 4600x600mm Turbines 4 6 8 8 Turbine Power 15KW 22KW 22KW 30KW Conveying Speed 0.5 4m/min 0.5 4m/min 0.5 4m/min 0.5 4m/min Blasting Speed 0.5 2m/min 0.5 2m/min 0.5 2m/min 0.5 2m/min Surface Cleaning Grade SA 2.5 SA 2.5 SA 2.5 SA 2.5 Surface Roughness 40 70μm 40 70μm 40 70μm 40 70μm Conveyor Loading Capacity 1,500Kg 2,000Kg 2,000Kg 2,500Kg Air consumption 5 7m³/min 5 7m³/min 5 7m³/min 5 7m³/min Dust Collector Filter Cartridge Filter Cartridge Filter Cartridge Filter Cartridge